Hozzászóláshoz be kell jelentkezni!
2015.07.20 16:38:44 (363.)
Dömi
(Veszprém)
|
Előzmény: Kiusro @ 2015.07.20. 11:45:04
Hi!
Thank you for comming!
You can see pictures in the facebook group of Club126, or later here, on this website https://www.facebook.com/groups/club126/
|
2015.07.20 11:45:04 (362.)
Kiusro
|
Előzmény: Andrei @ 2015.07.17. 14:04:31
Hi, thank you, the parts were available only the next day :( I pulled over in petrol station next to Auchan, the lady there was so nice and she called the shop (her boyfriend works there) I went to Auchan and found electrical tape for 5000V fireproof for 100huf and it did the job. Gyula was kind and he give me his old cables because he bought yellow ones, nice engine
I was in Budapest to the shop and bought some more parts but not all I needed because I could not find all.
On our way back home one of the exhaust brackets broke and the upper screw was lost, the problem is that the oil is coming out on that hole, right on the exhaust. I was lucky I had the needed screw to fit it in the hole, again this happened 5km before Kecskemet )
It was a nice meeting, were can I see the pictures?
Thank you.
|
2015.07.17 14:04:31 (361.)
Andrei
(Ráckeve)
|
Előzmény: Kiusro @ 2015.07.17. 12:25:32
Go there and buy new cables. 90 cm is OK.
Név: Unix Kecskemét Cím: Kecskemét, Szent László krt. 29. Gps: 19,7027 46,88152
|
2015.07.17 12:25:32 (360.)
Kiusro
|
Előzmény: Kiusro @ 2015.07.17. 12:17:07
My spark plugs cables are damaged :(
Kiusro szerkesztette 2015.07.17 12:26:38-kor.
|
2015.07.17 12:17:07 (359.)
Kiusro
|
Előzmény: Dömi @ 2015.04.30. 21:10:51
Hello, I am in Kecskemet and I need a fiat shop. Please
|
2015.04.30 21:10:51 (358.)
Dömi
(Veszprém)
|
Előzmény: Kiusro @ 2015.04.30. 11:33:47
Hi!
Great!
|
2015.04.30 11:33:47 (357.)
Kiusro
|
Hello,
yes he did and everything was OK, prices, communication, honest man. Delivery was a bit of a problem but he was very understanding and helpful.
Thank you for the help, I start the work on car and hopefully we will see each other at the meeting and drink something.
|
2015.03.25 16:07:25 (356.)
Dömi
(Veszprém)
|
Előzmény: Kiusro @ 2015.03.25. 15:26:12
Hi! I hope, they can help to you! We will organize the meeting in July (16-19.07), the details coming soon!
|
2015.03.25 15:26:12 (355.)
Kiusro
|
Előzmény: Dömi @ 2015.03.24. 20:48:44
Hello,
I have sent an e-mail to csakapolski and he already reply, he is leaving on 29.03.15.
Thank you for the contact details I heard there is a meeting in July?
|
2015.03.24 20:48:44 (354.)
Dömi
(Veszprém)
|
Előzmény: Kiusro @ 2015.03.24. 09:11:02
Hi,
unfortunately there are always less shops in Hungary, which could purchase fiat 126 parts.
But two of our members, Gyula Obrotka and Gábor Katona travels often to Poland to buy new parts. Maybe they could help to you. Contact to Gyula: +36 70 28 55 222 csakapolski@gmail.com They going to go for next trip in few weeks.
|
2015.03.24 09:11:02 (353.)
Kiusro
|
Előzmény: Pety@ @ 2014.07.12. 17:53:30
Hello again, does anyone know a shop in Makó for fiat parts? A website or e-mail? Thank you.
and another thing, how is it called the aluminium frame from the door window? Not the small triangle but the inner and outer frame of the window.
Thank you in advance.
|
2015.03.18 08:20:39 (352.)
Kiusro
|
Előzmény: Pety@ @ 2014.07.12. 17:53:30
Hello, the shop name is listed on the forum, I has only once there and it is located in Szeged: AUTOMOBIL P126 Szaküzlet 6724 Szeged, Csongrádi sgt. 60 Do they work with an e-mail address? Can I send an order and they can confirm and I go to pick the parts?
Thank you for the support, Caius
|
2015.03.18 08:01:06 (351.)
Kiusro
|
Előzmény: Szücsi @ 2014.10.20. 00:23:38
Hello, my e-mail address is Kiusro@gmail.com, I have updated my list for parts I need, can I upload the list somewhere?
Do you have an international meeting ( I don't know Hungarian :(... )?
|
2014.10.20 00:23:38 (350.)
Szücsi
(Bp)
|
Előzmény: Kiusro @ 2014.07.07. 12:35:33
Give an e-mail for you.
|
2014.07.12 17:53:30 (349.)
Pety@
|
Előzmény: Kiusro @ 2014.07.07. 12:35:33
Well, if you'd tell the shop's name, we may have the chance to help...
|
2014.07.07 12:35:33 (348.)
Kiusro
|
Hello, I need some parts for my Fiat 126p, the nearest shop is in Szeghed but they do not have a webpage, do you know if they have an e-mail address? i want to order the parts and arrange a day to pick them up, if they do not ship to Timisoara Romania. Thank you.
|
2013.04.27 13:22:31 (347.)
DKW
(Kömlõd)
|
Hi, As far I know, 24-26 May there will be a Fiat 126 fan's meeting in Jicin, Czech Republic.
Előzmény: roefel @ 2013.04.24. 17:49:20
|
2013.04.24 18:02:40 (346.)
Obrotka Gyula
(Budapest és Dunakanyar)
|
Előzmény: roefel @ 2013.04.24. 17:49:20
Hello!
Check this: http://www.126meeting.info/
|
2013.04.24 17:49:20 (345.)
roefel
|
Hello all,
If I remember well you have a big meeting on 24/25/26 - 5 - 2013. Some people in Holland are asking me if I know more. Could someone send me an email about the event? Place, date, cost, etc, so I can place it on our forum www.fiat126.nl? Please send the email to fiat126@live.nl
in advance, thank you very much, Sjors
|
2013.02.19 22:28:17 (344.)
dogi
|
By the way, will anybody join this event in Bielsko Biela from here?
|
2013.02.07 21:49:09 (343.)
dogi
|
Well depends of the money, but at the moment I'm sure, that we will be there. :-D
|
2012.10.25 22:26:20 (342.)
nyuszy
(Székesfehérvár)
|
Előzmény: wolf @ 2012.10.24. 13:06:27
We would also need some information about prices, accomodation etc. I am sure that quite a few cars will go from Hungary if such details will be acceptable.
|
2012.10.25 21:57:46 (341.)
hepike
(Debrecen)
|
Előzmény: wolf @ 2012.10.24. 13:06:27
Wow, it sounds great. When will the sign up close? Any limitations? Persons, cars, passengers?
Anyway, the correct link is below to sign up form: http://fiat126pclub.pl/2013/en.doc
|
2012.10.24 13:06:27 (340.)
wolf
|
After speaking with Fiat Auto Poland: On 8-9.06.2013 will take place a rally of Fiat 126p fans, in connection of the 40th anniversary of Fiat 126p production start in Poland (Bielsko Biala) Initial plan of event: 08.06.2013 An event in Bielsko Bia³a – visiting of the old factory FSM in Bielsko B, the current engine factory + an event in the city center. 09.06.2013 Drive from Bielsko Biala to the Auto Poland Factory in Tychy and sightseeing. End of the event. Usualy participants that come from far have to arrive a day earlier (07.06.2013). I will try to find a suitable place to rest for everyone. In the meantime www site is going to be established. People who are interested in participating please declare for the participation in the event. Declaration is not binding and its objective is to estimate the number of people that are interested in participating in the gathering. Please send the application form to the address zlot@fiat126pclub.pl CC iat126.club.polska@interia.eu [URL=http://fiat126pclub.pl/2013/en.doc]APPLICATION FORM[/URL] Obviously, participants who do not own Fiat 126p do not have to fill up point regarding data of the vehicle
|
2011.10.08 20:06:04 (339.)
GTMaster
|
Hello
Thought i'd liven up this thread and introduce myself I'm a member of the club126.co.uk forum for 3 years now and decided to pop over here to have a look. I also have a few bits to sell and thought i'd list them here as i'd have a better chance of selling them locally. I have a green '86 FSM 126p 650E that i restored and am a proud user of it. It's been on the road since last November after receiving its roadworthy. It was off the road for 2 years. Since then i've put about 4000km's into it without any major problems (smaller ones arose but never made me come to a standstill). I tried slalom racing with it but unfortunately flipped the car so i had to repair bodypanels (again). Apart from that it's a cool little car Since i'm moving i'll have to leave the car with my parents. I'll post pictures of it later on and hope that i'll be able to buy another one in the future (and of course, tune it )
All the best GTMaster
|
2011.01.28 22:50:12 (338.)
Hammy
|
Sorry it's been so long. I have been caught up in life and work. I managed to find seats locally but you can have my old ones for free if you want. You'll just have to come to Papa to get them. Also I'd still like too trade my sport exhaust for a stock. If your ever in Papa email me (dhamilton1974@gmail.com , and we can make the trade.
|
2010.12.02 20:04:20 (337.)
Hammy
|
Előzmény: Pety@ @ 2010.12.01. 19:48:41
email sent.
Előzmény: jmos @ 2010.12.01. 22:49:13
PM sent also will gt in contact over the weekend.
|
2010.12.01 22:49:13 (336.)
jmos
(Bakony)
|
Előzmény: Hammy @ 2010.12.01. 19:28:01
OK! Let's talk about it! Your exhaust is probably bought
We are so near that we could even meet somewhere if you have some free time.
I'ill write you a PM to get in contact.
jmos szerkesztette 2010.12.01 22:49:51-kor.
|
2010.12.01 19:48:41 (335.)
Pety@
|
Előzmény: Hammy @ 2010.12.01. 19:28:01
write me an e-mail to discuss the details. kornispeti@gmail.com
|
2010.12.01 19:28:01 (334.)
Hammy
|
Előzmény: Pety@ @ 2010.11.30. 20:41:38
Yeah I'm definitely interested. Are you wanting to trade or sale? If sale; how much?
Előzmény: jmos @ 2010.11.30. 21:45:49
Thanks, the only other thing I can think of at the moment is I'd like to swap my sport exhaust for a stock one.
|
2010.11.30 21:45:49 (333.)
jmos
(Bakony)
|
Előzmény: Hammy @ 2010.11.30. 18:03:28
Ooops! Yeah, now I'm late
But if you have ANY other not stock part to replace...
|
2010.11.30 20:41:38 (332.)
Pety@
|
Előzmény: Hammy @ 2010.11.30. 18:03:28
I have the original, old, low back seats. I have it in pair. They are not it outstanding condition, but they are fairly OK. They are 21 years old, and I can give you a pair of seatcovers made especially for these seats. The covers are blue. Tell me, if you're interested.
|
2010.11.30 18:03:28 (331.)
Hammy
|
Előzmény: Pety@ @ 2010.11.29. 22:13:19
Thanks, I looked at the blue ones already but I don't really want the sport seats. What kind do you have?
Előzmény: jmos @ 2010.11.29. 22:15:29
The old one could be welded and easily repaired but I have the sport seats and I really would like to replace them with the stock low back seats. I looked all through Peter's parts when I bought the car, he didn't have any spare seats but he does have the stock exhaust that I'd like to get from him.
Anyone interested in a trade? Sport seats for Factory low backs... The drivers seat frame has cracked but could be welded and the passenger seat is in great working condition.
|
2010.11.29 22:15:29 (330.)
jmos
(Bakony)
|
Előzmény: Hammy @ 2010.11.29. 21:54:02
And what about welding the old one? Or does it looks too worn?
Factory seats are not a rarity, therey can be often found at classifications section of this page. I'll keep my eye open and send a PM if I see one.
Also: did you call the previous owner of your car? AFAIK Firefighter Peti has a large stock of 126 parts... There must be an old seat somewhere in his garage
|
2010.11.29 22:13:19 (329.)
Pety@
|
Előzmény: Hammy @ 2010.11.20. 12:26:59
Előzmény: jmos @ 2010.11.29. 21:42:32
If you look for seats that you don't need to modify to apply you'd better use original Polski Fiat 126 or 126 BIS seats. Another option to use Polski Fiat 126 "sport seats" that you can find sometimes among the ads. (Now there is a blue pair of it) Or you can buy any kind of front seats that is not too wide to apply in the car, but than you have to work on the rails by yourself. I hope I could help.
Előzmény: Hammy @ 2010.11.29. 21:54:02
I have a pair of them. If you're interested in it write me a mail to kornispeti@gmail.com If you come to our next meeting in december in Budapest, I can give it to you then.
Pety@ szerkesztette 2010.11.29 22:15:31-kor.
|
2010.11.29 21:54:02 (328.)
Hammy
|
Előzmény: Pety@ @ 2010.11.29. 21:20:44
LMAO, well I appreciate his trying. I know I've tried using google translate to speak Hungarian and it left me sounding stupid.
Előzmény: jmos @ 2010.11.29. 21:42:32
Honestly I'd like to find a good set of the old style lowback seats but all I can find are the tall sport seats.
|
2010.11.29 21:42:32 (327.)
jmos
(Bakony)
|
Előzmény: Hammy @ 2010.11.29. 16:36:58
I think he wanted to say that you should use seats from similar types of vehicles: like Fiat 126 BIS or 127. As - I suppose - he thinks they may give more comfort and it should not be such a big issue to apply them.
Personally I'm quite new to this group so I don't know. Some say the old Suzuki Swift seats can also be easily modified to fit. Of course they are a lot better in comfort and in safety than the original ones.
|
2010.11.29 21:34:19 (326.)
KeMa
(Monorierdő)
|
Előzmény: Pety@ @ 2010.11.29. 21:20:44
Not yet.
Sometimes it's hard to understand her mother language too
|
2010.11.29 21:20:44 (325.)
Pety@
|
Előzmény: KeMa @ 2010.11.29. 21:08:56
Have you tried what is says when you type bödi's comment? I have. I can't understand it even in Hungarian...
|
2010.11.29 21:08:56 (324.)
KeMa
(Monorierdő)
|
Google translate
|
2010.11.29 17:38:43 (323.)
nyuszy
(Székesfehérvár)
|
Előzmény: Hammy @ 2010.11.29. 16:36:58
I don't understand either
|
2010.11.29 16:36:58 (322.)
Hammy
|
Előzmény: kisbödi @ 2010.11.28. 23:08:03
I'm sorry but I don't quite understand. Are you saying seats from any Fiat will fit?
|
2010.11.28 23:08:03 (321.)
kisbödi
|
Hammy
or simply remain in the bill only to the original fiat fiat bis-E and other blocks such as: Fiat 127
|
2010.11.20 16:31:28 (320.)
Dömi
(Veszprém)
|
Előzmény: Hammy @ 2010.11.20. 14:47:27
In hungarian: Autóbontó
http://maps.google.com/maps/ms?hl=hu&ie=UTF8&oe=UTF8&msa=0&msid=110823571629946275203.0004957daf8e5550e19a6
|
2010.11.20 14:47:27 (319.)
Hammy
|
Előzmény: Dömi @ 2010.11.20. 14:34:16
Cool, thanks for the tip.
|
2010.11.20 14:34:16 (318.)
Dömi
(Veszprém)
|
Előzmény: Hammy @ 2010.11.20. 12:26:59
There is a little village near of Pápa: Gyarmat. In Gyarmat is a shop with used cars, and of course with Polski Fiat. It isn't new part, but good.
|
2010.11.20 12:26:59 (317.)
Hammy
|
Do any of you know of a good place to get new front seats? My drivers seat is broken and I desperately need a replacement.
|
2010.11.15 19:21:06 (316.)
Hammy
|
Előzmény: nyuszy @ 2010.11.14. 16:09:21
Definitely will!
|
2010.11.14 16:09:21 (315.)
nyuszy
(Székesfehérvár)
|
Előzmény: Hammy @ 2010.11.14. 11:54:40
Then you have time to attend our meetings
|
2010.11.14 11:54:40 (314.)
Hammy
|
Előzmény: nyuszy @ 2010.11.13. 20:15:19
I will be here for at least 2 years.
|
|